Solo 3W IPX5 RCS recycled plastic solar Bluetooth® speaker with carabiner

Solo 3W IPX5 RCS recycled plastic solar Bluetooth® speaker with carabiner

SKU: 124347
Picture of Solo 3W IPX5 RCS recycled plastic solar Bluetooth® speaker with carabiner
Details
Boost your music with this RCS recycled rugged solar 3W Bluetooth® speaker with flashlight! It plays music, podcasts etc. from any Bluetooth® enabled device which makes it an ideal travel companion. The speaker features built-in music controls and a microphone for phone calls while on the go, as well as a handy flashlight. With the included carabiner it can easily be attached to for example a backpack, and with the IPX5 rating the speaker is protected against heavy rain. Thanks to its 400 mAh Li-ion battery, you can enjoy up to 3-4 hours of music at maximum volume. The charging time is 2 hours by cable, and approximately 6 hours by solar panel (depending on the sunlight brightness/consistency). The flashlight performance time is 10 hours when speaker function is off. Bluetooth® 5.3 with a working range of approximately 10 metres. Delivered with a user manual and a 30 cm USB-A to Type-C charging cable, and packed in a 100% recycled kraft paper box.
  • Default print method:Digital print
  • Production lead time in days of the default print method:2
  • Production lead time in days of the default print methodMaxQty:1000
  • Default print position:left side
  • Default print width:25
  • Default print height:45
  • Default print diameter:
  • Default max. amount of print colors:full colour
  • Default imprint measurements:25 x 45 mm
  • Default print area image:12434790_15_6562_105.jpg
  • Decoration Mandatory:No
  • Decoration Additional commentss:
Material
Recycled ABS Plastic

Product configuration

1
  • Black
2
3

Direct-to-Film is a process where we print your design onto a film and apply this using heat seal technology, really good for single to full colour designs and can be applied to a wide variety of garments.

Direct-to-Garment. A high quality printer applies the design directly onto your garment, really useful for full colour branding and complicated designs, garments must be 100% cotton.

A process which is mostly used for smaller designs, applied via industrial machinery to decorate your garments using needle and thread, a classy way to finish your garment branding.

A technique where ink is applied to a surface by being pushed through a mesh screen, typically onto garments, a hard-wearing process that can be used on many garment types.

Your Guide Price

Quantity
x
Unit Price
£0.00
Gross Price
£0.00
Please note, the prices indicated are subject to change and are intended as a guide only. For a full up-to-date quotation, please request a quote by simply adding the product to basket or by requesting a quick quote.
Add VAT
  • This product has a minimum quantity of 25